In a hard-material-machining, the choice of the right cutting tool could greatly influence your operation as a whole. Since the hardened workpieces would naturally apply more stress to the cutting edges, the workpiece can begin to affect surface finish and precision.
This is where PCBN inserts become an important option for many hard machining applications. It is made to withstand rigorous cutting conditions and is frequently considered when cutting hard steels and steels of similar nature. However, picking the correct insert isn’t simply putting a tool in because it’s hard or it wears long.
The workpiece, operating condition, required finish, and machine setup must be evaluated. In this blog, we will analyze what PCBN inserts are, their application in hard turning, and what factors can help determine the correct one for your needs with aid from HyperCBN.
What Are PCBN Inserts, and Why Are They Used for Hard Machining?
As mentioned, we include ranges for grade/geometry below, so we should define what makes this insert different from most machined products. What is PCBN? PCBN is poly crystal cubic boron nitride and is an exceptionally hard cutting material for machining tasks of extreme difficulty.
Here are the main reasons they are considered for hard machining:
High hardness – used when machining parts that are too hard for standard materials.
Wear resistance – the tool is designed to stand up to machining conditions and not dull too quickly.
Heat resistance – when machining with any of the hard materials, much heat is generated in the cutting zone and thus is important.
Finishing work – can be used for the finishing processes required by some materials.
Applications – can be chosen according to grade and geometry for a variety of hardened material applications.
What must be understood is that not all of PCBN inserts work for all purposes. Factors like the workpiece material and its hardness, the condition of the cut, and the requested surface finish have all got to be examined before selection.
What Makes Hard Turning Different From Regular Turning?
Machining is carried out with challenges distinct to those faced with soft machining. Here, instead of turning off relatively soft workpiece material, the cutting of hardened workpieces (commonly after heat treatment) occurs. This causes variation in the behavior of the cutting edge and thus manipulation.
A few factors make hard turning more demanding:
Increased Heat in Cutting Area
The combined forces of the tool and hardened work material can bring about tremendous amounts of heat. Thus, thermal properties are significant.
Increased Forces on Tool Edge
The insert faces higher stresses from harder material, so strength and wear of the cutting edge are important factors to consider.
Surface Finish Comes to the Fore
It is important to realize that most hard turning applications are finishing operations, so the insert must take the workload off, ensuring dimensional accuracy and quality of surface finish.
Consider the Machining Conditions
Speed, feed, depth of cut, hardness of the workpiece, and rigidity of the machine all affect the way the hard turning inserts operate when undertaking a task.
For this reason, insert selection should be governed by the actual operation required rather than solely the hardness.
How Do PCBN Inserts Handle Hardened Materials?
Hardened parts are more demanding when it comes to cutting pressure and temperature, so the tool insert must be tough. This is one reason a PCBN insert would be selected for a hard machining part.
However, performance is tied not only to the cutting tool insert; it is important that the proper PCBN grade is balanced along with the proper insert geometry, and it depends greatly upon the workpiece hardness, cutting speed, feed speed, depth of cut, type of machining process, etc. In this case the insert will contribute to the machining, keeping a uniform surface roughness.
Therefore, do not choose an insert simply due to how hard the parts are; take into account the total machining operation.
Where Do WNGA Inserts Fit Into Hard Turning?
A WNGA insert is one possibility that can be explored for turning where it is important to establish a geometry and an edge orientation. The geometry itself could affect the way the tool approaches the material, the manner in which force is applied, and indeed which machining operation could be applied.
When selecting a WNGA insert, don’t look at the shape alone. Consider:
- Workpiece material and hardness
- Type of cut and depth of cut
- Required surface finish
- Machine and setup rigidity
- Recommended cutting conditions
The right combination of geometry and grade is important because two inserts with the same basic shape may be intended for different machining conditions. Always match the insert to the actual application rather than choosing it based only on its designation.
What Should You Check Before Choosing an Insert?
There is no single insert that works perfectly for every hard-turning job. Points to look at before you buy:
Workpiece hardness – Determine how hard the material is and if it has been heat-treated.
Material of workpiece – Different metals behave differently with cutting. Example: hard steel and cast iron.
Cutting conditions — the speed, feed rate, and depth of cut all have an influence on insert performance.
Surface finish — a light finish operation may necessitate the selection of a different insert than a heavier roughing operation.
Machine conditions — a stable machine with securely clamped workholding can influence the cut.
The previous points will also give you an indication as to when you can employ hard-turning inserts for the desired operation. Taking a little time to understand the job beforehand can prevent poor tool selection and unnecessary insert wear.
Common Mistakes That Can Affect Insert Performance
Sometimes even a high-quality cutting insert can have very bad performance if machining conditions are not right. Common errors and mistakes to be avoided:
- Choosing an insert without checking the workpiece hardness.
- Using cutting parameters that do not match the insert recommendation.
- Ignoring machine vibration or an unstable setup.
- Selecting geometry based only on shape instead of the actual operation.
- Continuing to use a worn cutting edge when it is already affecting the finish.
The same applies when working with WNGA insert geometries. The designation alone does not tell you whether an insert is right for your specific job. Grade, geometry, workpiece material, and cutting conditions should be considered together.
A little attention during insert selection can help avoid unnecessary tool wear and inconsistent machining results with the help of HyperCBN.
PCBN or Carbide: Which Makes More Sense for Hardened Materials?
PCBN versus carbide in hard machining. Which is better? It all depends on the particular application; neither material can do the job of the other.
PCBN
The material for machining applications, which demands a high degree of hardness, wear resistance, and a good surface finish.
Carbide
A versatile cutting-tool material used across many turning operations, particularly where workpiece hardness and cutting conditions are within its practical range.
The goal isn’t necessarily one material being better than another; consider the hardness of the workpiece, conditions, finish, and the type of job, and go from there. In demanding applications, PCBN inserts may be considered when the machining conditions call for a cutting material designed specifically for harder workpieces.
How Can You Get Better Results From Hard Turning?
Good insert selection is only one part of the machining process. The geometry of operation is also playing a role in tool performance and outcome.
Some principles for consideration:
- The workpiece rigidity has to be high; avoid vibration.
- Follow the recommended cutting conditions for the selected insert.
- Make sure the machine and tooling setup are sufficiently rigid.
- Monitor the leading edge of the insert for wear rather than waiting for the finish to suffer.
- Match the grade and geometry of the insert to the material and type of cut.
By conforming to such basic methods, hard turn insert quality and reproducibility will be enhanced, and common problems faced with faulty parameters for machining will be avoided.
How Do You Choose the Right WNGA Insert for Your Job?
Choosing HyperCBN that helps with the machining job, not just the insert designation. Ask yourself a few basic questions before making the selection:
What material are you cutting?
The grade of tooling you use is dependent on the workpiece material and its hardness.
What kind of cut are you making?
Roughing, finishing, continuous cuts, and interrupted cuts can place different demands on the cutting edge.
What finish do you need?
If surface quality is important, the insert geometry and cutting conditions need to work together.
How stable is your setup?
Machine rigidity, workholding & vibration all affect how an insert will perform.
A WNGA insert, therefore, needs to be specified as part of the overall machining package, rather than purely by its geometry. It is crucial that manufacturers’ recommendations for both grades and applications be consulted.
Why Consider HyperCBN for Your PCBN Requirements?
When selecting a supplier of cutting tools, you look not just at an insert that suits your task. You also desire clarity in product information and advice that assist in judging if the offered solution actually suits your manufacturing process.
Focuses on CBN and PCBN tooling for use in machining where specific cutting strategies are required to machine hardened workpiece materials. Manufacturers may use this to select suitable options for the relevant turning application.
When comparing a PCBN insert, it remains the same to select on the basis of the grade, geometry, workpiece material & recommended cutting conditions. Actual application dictates the suitable insert and not a presumption that any insert works for every turning job.
Frequently Asked Questions (FAQs)
1. Uses for PCBN inserts?
PCBN inserts are mainly used for machining the hardened and hard-to-cut materials and demand constant cutting and high wear-resisting performance.
2. What is a hard turning insert?
Hard turning inserts are for turned hardened products and for selecting according to the workpiece, conditions, and finishing.
3. What is a WNGA insert?
A WNGA insert is a type of turning geometry that is chosen based on the operation and workpiece.
4. How do I choose hard turning inserts?
Select the hard turning insert from the factors like workpiece hardness, material, working parameters, machine condition, and required surface finish.
5. Is it possible to have WNGA geometry inserts PCBN?
Yes, PCBN inserts can also be provided with different geometries, including the WNGA inserts, if possible with the product.