Walk into any machine shop and you will see workers changing small, shiny pieces on their lathe tools. These pieces are called inserts. They do the real cutting work, and choosing the wrong one can waste time, money, and good material.
If you are new to this, names like CNGA, TNGA, and WNGA can look confusing. Do not worry. HyperCBN makes CBN cutting tools for hard machining jobs, and this guide uses a CNGA insert as the main example to explain everything from zero.
In this blog, you will learn:
- What an insert is and why CBN is so special
- How to read the codes written on an insert
- How a TNGA insert is different from the other shapes
- How to choose the right one before you buy
- Answers to questions most beginners ask
What Is A Cutting Insert, And What Does It Actually Do?
A lathe is a machine that rotates a piece of metal very quickly and then removes material with a cutting tool. Picture peeling an apple. The apple rotates in your hand, and the knife removes the skin. On a lathe the apple is the rotating object, and the insert acts as the sharp knife blade.
The bonus with an insert is that it is changeable. If one side becomes dull, simply flip to the other side or change it out. This is unlike chucking the entire tool away.
Inserts come in all kinds of shapes, and all shapes have a purpose. For example, a CNGA insert looks like a diamond, and some look like triangles or squares. Heavy cuts can be made with a tough shape. A pointed shape can reach tight corners.
So how do you know which one you need? Keep reading. We will also meet the WNGA insert and see where it fits.
What Is CBN, and Why Is It Used for the Toughest Metals?
CBN stands for Cubic Boron Nitride. It is the second-hardest material in the world, after diamond. Normal carbide tools wear out fast when they cut very hard metals, but CBN stays sharp for much longer. This is why a TNGA insert with a CBN tip can cut hardened steel that would quickly ruin an ordinary tool.
CBN is mainly used on three kinds of material:
- Hardened steel: steel that has been heat-treated to become extra tough
- Cast iron: a hard, brittle metal used in parts like brake discs
- Superalloys: special strong metals used in places like jet engines
CBN also makes “hard turning” possible. This means cutting a hardened part directly on a lathe. Earlier, such parts usually went for grinding, which is slow and costly. With hard turning, many jobs can skip that step.
For a buyer, this means fewer steps and faster work. A WNGA insert with a CBN edge is made for exactly this kind of job.
How to Read an Insert Code: What C, N, G, and A Really Mean
Every insert has a code, like CNGA120408. It looks like a secret message, but it is just a list. Each letter or number tells you one thing.
| Letter | What it means | In simple words |
| C | 80° rhombic shape | A diamond shape with 80° corners |
| N | 0° clearance (negative insert) | Straight sides: the holder sets the cutting angle. |
| G | Tight tolerance | The size is very accurate. |
| A | Hole in the middle | Used to clamp the insert on the holder |
So when you buy a CNGA insert, these four letters already tell you the shape, the sides, the accuracy, and the hole type.
The numbers come next. Express the size, thickness & corner radius. The CNGA120408 has 12 for size (12.7 mm), 04 for thickness (4.76 mm), and 08 for corner radius (0.8 mm). Check out the chart in our catalogue to see how to specify the perfect insert for your applications.
The same rules work for the other codes. A TNGA insert follows them too; only the first letter changes. T means a 60° triangle, and W means an 80° trigon.
CNGA: The Strong All-Rounder With a Diamond Shape
The insert that comes with a CNGA is 80° wide and stronger. Because the corner is so wide, there’s more metal behind the cutting edge, making it less prone to chipping.
Good for: general turning, facing, profiling (cutting curved shapes), and all operations other than boring and cutting deep into the piece.
Be warned: the wide corner doesn’t get into tight corners as well as a pointed shape.
Why buyers like it: one shape does many jobs, so it is an easy place to start.
HyperCBN offers this shape as both brazed PCBN inserts and PCBN tipped inserts, so you have more than one way to buy it.
TNGA: The Sharp Triangle That Reaches Tight Spots
Visualize your finishing a shaft that happens to have a tiny ledge in it. A tool with a wide corner might not enter into that corner. The shape of a TNGA insert’s tip is a 60° triangle, so the tip’s corner is sharp.
A thinner corner means you don’t have much material behind it, and most likely this shape is used for lighter, cleaner cut finished cuts rather than a huge fat one. If your job demands a smooth surface on the hardened part, give it a shot.
WNGA: The Trigon Shape That Gives Strength and Better Reach
A WNGA insert has an 80° trigon shape. “Trigon” means a three-cornered shape that looks like a triangle with its tips trimmed. It has the same 80° corner strength as the diamond shape, but its body is more triangular. That often helps when you cut close to a step or shoulder on the part.
Here is a quick comparison of the three shapes:
| Shape | Angle | Known for | Keep in mind |
| CNGA | 80° rhombic | Strong corner, general use | Less reach in tight corners |
| TNGA | 60° triangular | Good reach, fine finishing | Slimmer corner, lighter cuts |
| WNGA | 80° trigonometry | Strong corner with better reach near steps | Check that it fits your holder |
That is why a WNGA insert is popular when a job needs both strength and good reach.
Brazed, Tipped, And Solid: Which Type of CBN Insert Is Which?
CBN is costly, so makers do not always build the whole insert from it. You will mostly see three types:
- Solid: most of the insert is made of CBN. HyperCBN lists these under codes like CNGN and TNGN, where the last N means no hole.
- Brazed: a small piece of CBN is joined (brazed) onto the corner of a carbide body. Only the cutting corner is CBN, which usually keeps the price lower. The CNGA insert is one of the five standard shapes in this group.
- Tipped: also built with CBN tips, but offered in a wider range of shapes, corner radii, and edge setups.
The WNGA insert is also on the brazed list, along with DNGA and VNGA shapes.
Insert Grades Explained: Matching The Right CBN Grade To Your Material
The shape is only half of the choice. A CNGA insert, for example, can come in different grades. A grade tells you how that CBN material is made to behave on different jobs. HyperCBN lists three grades on its turning tools page:
| Grade | Best for |
| HCBN5010 | Continuous cutting of hardened steels (50–65 HRC) |
| HCBN5020 | Interrupted cuts in cast iron |
| HCBN5030 | Multi-purpose, high-speed finishing of superalloys |
A few words in that table need a simple explanation:
HRC is a number that shows how hard a metal is. A higher number means harder steel. A quality kitchen knife falls between 55 and 60 HRC.
When an interrupted cut occurs, the cutting edge encounters the workpiece on and off. This impact can break or chip the cutting edge.
Interrupted cut: this happens where the part is slotted, drilled, or interrupted in the cut so that the tool is constantly hitting and bouncing off the metal like a little hammer tap.
Grades and shapes go hand in hand. The same grade might be used with a TNGA insert or with any other shape, so always select both.
How To Choose The Right Insert In Three Simple Steps
- Check your materials. Find out its hardness, abrasiveness, and thermal conductivity. For example, carbon steels and cast iron require different grades.
- Pick the shape and size. Look at your tool holder and your job. If your holder takes a WNGA insert, it can be a good fit near shoulders. For strong, general work, the diamond shape is the usual starting point.
- Do a test run. Before you order a big batch, try one CNGA insert on your job. Observe the cut and modify the parameters if required.
No decisions yet? Give the material, hardness, and machine you have, and the supplier can often recommend a good compromise.
Where These Inserts Are Used: From Car Parts To Mining Machines
CBN inserts are built for jobs where normal tools give up. HyperCBN lists these industries and example parts on its website:
Automotive: camshafts, gear hubs, brake disks, and brake drums
Aerospace: landing gear and turbine shafts
Energy: bearing races and valve parts
Die and mold: molds made from hardened tool steel
Before You Place The Order: A Simple Checklist For Buyers
Regardless of whether you select a TNGA insert for a light finishing cut or a more robust form for a heavier cut, the concept remains unchanged. Match the insert to the workpiece.
What to check before ordering CBN inserts:
- What do I make it from? How strong is it?
- What is my cut like (smooth or broken)?
- Which shape does my tool holder accept?
- Do I need a standard size or something custom?
- Have I asked for the exact CNGA insert code, with the size and corner radius?
If your job is special, HyperCBN also makes customized solid CBN options, such as wiper inserts, chipbreaker inserts, and custom chamfers. You can see the full range of brazed PCBN inserts and other turning tools on its website.
One more tip. Share your holder type with the supplier, especially if you need a WNGA insert, so the fit is right the first time.
Frequently Asked Questions (FAQs)
1. What is a CNGA insert used for?
Tools with a CNGA insert are widely used in turning applications on cast iron and hardened steels. Its solid 80° corner angle makes it a good choice for general turning, facing, and profiling.
2. What are these names for?
Letters specify the shape, clearance angle, tolerance, and type of hole of the insert. The digits specify its size, thickness, and corner radius of the insert.
3. Is a TNGA insert better than the other shapes?
Not better, just different. Its slim 60° corner reaches tight spots and suits finishing. A stronger shape is usually safer for heavy cuts.